Shree Impex Steel operates its own manufacturing facility at Kalamboli, Navi Mumbai — equipped with heavy hydraulic presses, electric annealing furnace, and precision lathe machines. Every fitting we supply is manufactured under our direct quality control.
Our manufacturing facility is strategically located at Kalamboli Warehousing Complex, Navi Mumbai — minutes from the Jawaharlal Nehru Port (JNPT), Asia's largest container port. This enables fast raw material receipt and rapid finished goods dispatch for both domestic and export orders.
Road No. 6, Kalamboli Warehousing Complex
Kalamboli, Navi Mumbai — 410218
Maharashtra, India
Dedicated buttweld pipe fittings manufacturing unit. Equipped for hot forming, heat treatment, machining, finishing, inspection, and dispatch — all under one roof.
Located minutes from JNPT (Nhava Sheva) — India's largest container port. Enables fast raw material sourcing from mill and rapid export dispatch to UAE, Saudi Arabia, Singapore, UK, USA and 50+ countries.
Office No. 02, Ganesh Darshan, Grant Road East
9th Khetwadi, Mumbai — 400004
Maharashtra, India
Our facility is equipped with heavy-duty machinery capable of forming buttweld fittings in all grades — from standard carbon steel WPB to high-alloy Inconel 625 and Hastelloy C276.
| Machine | Specification | Purpose |
|---|---|---|
| Hydraulic Press | 350 Metric Ton | Heavy forming of large diameter and thick wall fittings |
| Hydraulic Press | 150 Metric Ton | Medium size fitting forming — elbows, tees, reducers |
| Hydraulic Press | 100 Metric Ton | Small to medium size fitting forming |
| Electric Furnace | Hot Annealing | Solution annealing and stress relief heat treatment for all grades |
| Heavy Duty Lathe | 9 Feet | Bevel end preparation and machining of large fittings |
| Heavy Duty Lathe | 7 Feet | Bevel end preparation and precision machining |
| Heavy Duty Lathe | 5 Feet | Medium size fitting machining and finishing |
| Heavy Duty Lathe | 4 Feet | Small to medium size fitting machining |
| Base Grinder | Heavy Duty | Surface grinding and finishing |
| Hand Grinder | Industrial | Surface preparation and weld area finishing |
| Buffing Machine | Industrial | Surface finishing and polishing for stainless steel grades |
Seamless pipes, plates, or billets sourced from approved mills with EN 10204 3.1 Mill Test Certificates. Heat number recorded for full traceability. Incoming material inspection against ASTM chemical and mechanical requirements.
Raw material cut to precise dimensions for the fitting type and size being manufactured. Heat number transferred to each cut piece — maintaining traceability throughout the process.
Material heated and formed on our 100MT, 150MT, or 350MT hydraulic press depending on size and wall thickness. Dies engineered to ASME B16.9 dimensional requirements. Multiple pressing operations for complex shapes like elbows and tees.
All stainless steel and alloy grades undergo solution annealing or stress relief in our electric furnace. Temperature and time controlled per ASTM requirements for each grade. Critical for WP91 (PWHT at 760°C), stainless steel (solution anneal at 1050°C+), and duplex grades.
Ends machined on our heavy duty lathe machines to ASME B16.25 bevel end requirements. Wall thickness brought to specified schedule. Inside diameter cleaned and finished. Outside diameter turned to ASME B16.9 tolerances.
Surface grinding and finishing on base grinder and hand grinder. Buffing for stainless steel grades — achieving smooth surface finish. All surface defects removed. Fitting inspected for cracks, laps, or seams.
100% dimensional inspection per ASME B16.9. Centre-to-face, OD, wall thickness, bevel angle — all checked against standard. Non-conforming pieces rejected. Inspection records maintained for each batch.
Each fitting marked per ASME B16.9 — manufacturer name, size, schedule, material grade, and heat number. EN 10204 3.1 Mill Test Certificate prepared with actual chemical and mechanical test results, heat number, and dimensional compliance.
Fittings packed in wooden cases or as per customer requirement. Bevel ends protected with plastic caps. Export packing for international shipments — fumigated wooden crates with moisture protection. Dispatch from Navi Mumbai within 24–48 hours for stocked items.
Full quality management system covering all manufacturing operations — from raw material procurement through finished goods dispatch. Documented procedures, work instructions, and quality records maintained for every batch.
Every incoming raw material verified against EN 10204 3.1 MTC before entering production. Chemical composition and mechanical properties confirmed. Heat number recorded and maintained through production.
Dimensional checks at each stage — after forming, after heat treatment, after machining. Non-conforming material identified and segregated at each stage before proceeding to the next.
100% dimensional inspection per ASME B16.9 on finished fittings. Visual inspection for surface defects. Wall thickness verification. Bevel end geometry confirmation per ASME B16.25.
SGS, Bureau Veritas, TÜV, and Intertek third-party inspection arranged on request. Pre-shipment inspection certificates issued before loading. EN 10204 3.2 (third-party witnessed MTC) available on request.
Positive Material Identification (PMI) using XRF analyser available for specialty alloy grades — SS 316L, Duplex S31803, Inconel 625, Hastelloy C276. Confirms actual alloy composition matches MTC before dispatch.
Grade, type, size, schedule, quantity. We respond within 4 hours with pricing from our Navi Mumbai factory.